Launching Your PWC
-
Check your personal watercraft for possible damage during the trip.
-
Walk down the ramp to determine the type of ramp or launching site you are using.
-
Determine your place in the line of boats waiting to launch. Be courteous.
-
As you prepare for the actual launch, release the tie downs and put in the plug.
-
Ventilate the engine compartment by opening it.
-
Secure all latches.
-
Back your trailer into the water to the manufacturer's recommended depth for unloading.
-
Quickly and safely remove your PWC from the trailer and move it to the shoreline
launching site.
-
Remove your vehicle and trailer from the ramp area as soon as possible and park it in
the designated area.
-
Get your life jacket and other safety equipment from your vehicle and take them to the
launching site.
Your PFD must be worn if "driving" from the ramp to the
courtesy dock/shoreline launch site.
-
The lanyard is the key. Never plug it in until you are seated and ready to get underway.
The lanyard should be removed when the PWC is not in use. Never park on the beach with the
lanyard connected.
|
Arizona State page | Read the Safety Handbook | Take the Test
Home | FAQs | Related Links | Contact Us | U.S. Map
For demonstration purposes only, © all rights reserved.